DVB tuners Print

  • dvb, tuner, satellite, dvb-s2, atsc, terrestrial
  • 0

Medusa Panel › DVB › Add Adapters

A DVB tuner card turns a satellite, terrestrial or cable signal into channels the engine can ingest. Medusa drives the card with DVBlast and tunes it from the stream form: you pick the card, describe the transponder, and the engine locks onto it and pulls the services you select.

DVB cards are discovered per server. The tuner runs on the server the card is in; in a cluster the master forwards tuning and control to that server. Install the card drivers before you start — see System requirements.

Add a DVB source

Open Medusa Panel › DVB › Add Adapters and choose the server and the card. The tuning fields appear once you pick a Delivery System.

Tuning parameters

Which fields are shown depends on the delivery system. The common ones:

  • Delivery System — the standard of the signal: DVB-S / DVB-S2 (satellite), DVB-T / DVB-T2 (terrestrial), DVB-C Annex A/B (cable), ATSC, ISDB-T.
  • Frequency and Symbol Rate (satellite / cable), or Bandwidth (terrestrial) — the transponder you tune to.
  • Polarisation / Voltage — 13V for vertical / right-hand, 18V for horizontal / left-hand (satellite).
  • Modulation — Auto, QPSK, 8PSK, 16APSK, 32APSK (satellite); QAM-16 to QAM-256 (cable); VSB-8 / 16 (ATSC).
  • FEC — forward error correction: Auto or a fixed rate from 1/2 to 9/10.
  • Rolloff (DVB-S2) — 0.20, 0.25 or 0.35; Pilot — Auto, On or Off.
  • DiSEqC — select the dish position / LNB: 1 to 4 or A / B, or Disabled for a single dish.
  • Unicable (single-cable, EN50494 / EN50607) — version 1 or 2, each tuner on its own user band, for a shared LNB.
  • Multistream / PLS — for multistream transponders: mode Root, Gold or Combo with a stream id and PLS code.
  • Advanced — inversion, guard interval, transmission mode and hierarchy (terrestrial), budget mode, and the charset used to decode EPG and service names.

Example — Astra 19.2°E (DVB-S2)

Delivery System DVB-S2
Frequency       11494 MHz
Polarisation    Horizontal (18V)
Symbol Rate     22000
Modulation      8PSK
FEC             Auto
Rolloff         0.35
DiSEqC          1

Pick services

Once the card locks, the engine lists the services (TV and radio) on the transponder. Select the ones you want; each becomes a stream you can transcode, package and deliver.

Scrambled muxes need descrambling before the engine can use them. Assign a SoftCAM or a CAM module to the source — see ClearKey and SoftCAM. Only decrypt content you hold the right to carry.
On a shared dish, use DiSEqC to pick the satellite position. On a single-cable (Unicable) install, give every tuner its own user band so they do not collide on the cable.

Related


Was this answer helpful?

« Back