Product updates

Changelog

Every release of the Medusa Streaming Engine, newest first. What we added, fixed and changed.

v1.2.3 Latest

Added

  • HTTPS / SSL made usable end to end. Each server's settings now shows a live SSL Status panel: whether HTTPS is active, the certificate's issuer and expiry, a DNS check of the domain, and the right one-click action for the situation — Restart engine to activate a just-saved mode, or Request certificate when it has not been issued yet. Let's Encrypt certificates are obtained automatically a few seconds after enabling and then renew themselves, so there is nothing to do once it is green.
  • In a cluster, the panel shows each server's own certificate status (including remote slaves and CDN edges) and warns when only some servers are on HTTPS, since viewers redirected between a secure and a plain-HTTP node get mixed-content errors.

Fixed

  • Enabling Let's Encrypt HTTPS now actually works. Previously the engine could not start the certificate challenge next to its own web server and the certificate was never issued; HTTPS is now validated over the HTTPS port and serves correctly in the browser.
  • With HTTPS enabled, stream and playlist URLs are handed out as https:// on the standard port under the configured domain, so playback and DRM work over HTTPS instead of falling back to plain HTTP.
  • Switching HTTPS back off works cleanly, without a browser-cached redirect that would keep forcing HTTPS.
  • After an in-panel or installer update, the panel's styles and scripts refresh on their own instead of needing a manual hard reload.
v1.2.2

Fixed

  • DRM can now be set up in the panel: the content-protection options have their own "DRM" tab under System Settings and save correctly, and turning a stream's DRM Provider off now stays off.
  • The built-in stream player now plays DRM-protected streams, and its source selector shows the DASH (.mpd) stream it actually uses.
  • Loading a Stream Profile preset from the Add Profile page no longer returns a "not found" error.

Added

  • Turning on DRM (for a stream, movie, series or globally) now warns when the panel is reached over an insecure, plain-HTTP address, because encrypted playback only works over HTTPS (or on the server itself). Open the panel over HTTPS before relying on DRM.
  • The per-server version badges — on the server list, the overview, the server detail popup and the CDN status page — now show when a newer release is available (for example "v1.2.1 → 1.2.2"), in the same colour as the header and footer update notice.
  • The Software Update page now shows release notes as structured sections (Added / Fixed / Changed) instead of one block of running text.

Changed

  • Stream Profile presets no longer include a separate "+ DRM" variant. DRM is chosen per item with the DRM Provider setting on the stream, movie or series (or in bulk with Mass Edit), so a profile only carries encoding settings.
v1.2.1

Added

  • Self-hosted content protection (DRM): streams and VOD can now be encrypted by the engine itself, with no external DRM service and no per-stream licence cost. Output is delivered as encrypted CMAF (one set of segments serving both HLS and DASH) and the player unlocks it with a short-lived, signed key from the engine's own key server. Protection is per item and opt-in: a stream, movie or series is encrypted only when its new "DRM Provider" field is set to Medusa — leaving it off keeps the item unencrypted, even when a provider is configured globally. Choose the scheme (CENC or CBCS) and the key-token lifetime under System Settings → DRM. This stops casual copying, hot-linking and playlist/segment scraping; the existing EZDRM option remains for studio-grade hardware DRM (Widevine/PlayReady/FairPlay).
  • Mass Edit (Streams): "DRM Provider" can now be set on many streams at once — select streams in the list and turn Medusa DRM on (or off) for all of them in one step.
  • The built-in stream player now plays DRM-protected streams and can show an optional moving watermark (viewer identifier, IP and time) as a screen-capture deterrent, switchable under System Settings → DRM.
  • Optional live key rotation for Medusa DRM: set a rotation interval (seconds) under System Settings → DRM and the content key is rotated for every crypto period, with the engine serving the fresh key to players automatically — no external DRM service. Off by default; keys stay per stream when it is off.
  • Media selection (bouquets, playlists): a "Select all" and "Move selected" control to move channels between the available and selected lists in bulk, across the Streams, Movies and Series tabs.
  • Stream Profile presets: a "Load Preset" picker on the Add Profile page offers ready, live-streaming-optimised profiles for common resolutions and codecs (H.264 and H.265), with the target bitrate shown in the name, in software and — where a supported GPU is detected — GPU-accelerated variants, and a "+ DRM" variant that also turns on Medusa DRM (with the transcoding and deinterlacing that encryption needs). Load one, review it and save it as your own profile. GPU presets are pinned to the detected GPU, so a machine with more than one GPU is never ambiguous.
  • Port-conflict detection: saving a stream whose output port (UDP, RTP, TCP, ZMQ or RTSP) clashes with another stream's output or with one of the engine's own ports now shows a clear warning naming the conflict, instead of the stream later failing to start with a cryptic bind error.
  • API: new endpoints to automate the presets and DRM. GET /api/v1/profile-presets lists the presets available on the server (with the detected GPUs); POST /api/v1/profile-presets/{key} creates a profile from one; and GET/PATCH /api/v1/streams/{id}/drm read and set a stream's DRM provider — so provisioning and DRM can be driven from scripts, not only the panel. Documented in the built-in API reference (Swagger).

Fixed

  • DVB adapters now show their channel (service) names the first time the adapter page is opened, instead of only after a refresh.
  • Modal dialog titles are now readable in the dark theme across the panel.
  • Stream and profile forms now accept "Auto" as the hardware-acceleration device without reporting a numeric-setting error.
v1.2.0

Added

  • Increase & Optimize: a new System Settings tab that measures this server (RAM, network card, CPU) and offers to raise its limits for high viewer counts — the open-file and process limits (ulimit) and the kernel network settings (sysctl). Pick a profile — Conservative, Balanced (recommended) or Aggressive — each explained in plain language; the recommended values are sized to your hardware, so a small server and a large one get different settings. Everything is capped, written only to Medusa's own files, shown before it is applied, and fully reversible with one click. On a cluster, each node measures and tunes itself, applied from the master one node at a time.
  • EPG Auto-Match: a new EPG Matching page in the Tools menu that matches your streams to the loaded EPG guide automatically by name. Review every suggestion with its confidence, auto-assign the confident matches in bulk, or search the whole guide and pick a channel yourself where the match is unsure or wrong — then assign the EPG channel to many streams at once instead of setting each one by hand. Nothing changes until you apply, and any assignment can be changed again afterwards.
  • Increase & Optimize can now restart the service straight from the panel after you raise the file-descriptor limit, so the new limit takes effect without logging in over SSH (with a reminder that running streams are briefly interrupted).

Changed

  • Guide & Metadata: the FreeEPG Countries selector now sits directly under the EPG Source field.

Fixed

  • The "Load EPG now" panel now shows each source's real channel and programme counts (what the source carries) instead of 0 when the guide was already up to date.
v1.1.9

Added

  • Guide & Metadata can now load EPG automatically by country from free-epg.de: pick one or more countries and their guide feeds are added to the EPG Source (your own manual sources are kept).
  • "Load EPG now" now shows a live progress panel: each source appears as it loads, with its channel and programme counts, size and time, a running total and the regenerated EPG file size — so you can see exactly what happened instead of a silent result.
  • Every server now shows its running version, and flags an amber "v1.1.7 → 1.1.9" when an update is available for it — in the Server list, the overview cards, the server details popup and the CDN Status page.
  • Servers with CDN Service enabled now carry a purple "CDN" badge in the Server list, the overview cards, the server details popup and the CDN Status page.
  • Mass Update: select servers in Manage Servers and choose "Mass Update" from the Mass Action menu to bring them all to the master's version, one after another.
  • The Connection Summary map now gives each country its own colour, shown both as a square next to the country in the list and when you hover the country on the map.

Changed

  • The Connection Summary country list now sits in its own panel beside the map, so it no longer overlaps the map's zoom buttons, and it shows full country names instead of two-letter codes.
  • The server actions menu entry "Install / Sync" is now called "Update / Sync".

Fixed

  • A failing EPG source no longer aborts the whole load — it is skipped and reported in the "Load EPG now" panel, and the remaining sources still load, so one unreachable feed can't wipe the guide.
  • Country dropdowns (such as FreeEPG Countries) that open upwards no longer hide their last entry behind the field — the full list is scrollable.
  • The Connection Summary map no longer overflows its area at some screen sizes.
  • Server cards opened the details popup on any click; now only "View details" opens it.
  • The IP Database Status row now lines up with the rest of the settings page.
  • On the Capacity & Reliability page the playable-resource list now appears as soon as a playback user is selected, instead of only after clicking Select All.
  • The Connection Summary map now counts connections from the whole cluster, including viewers served by CDN / edge servers, instead of only the ones on the master.
  • Database logs no longer grow without bound, so they stop filling up disk space over time.
v1.1.8

Added

  • Server cards on the overview now show the private and public IP, the country flag, the ISP / hosting company and the license status, matching the Server list.
  • Public IP addresses are now clickable everywhere they appear and open an IP lookup in a new tab.
  • The Connection Summary map now lists, top-left, the countries your connections come from, ranked with the most connections first.
  • The server details popup now shows the public IP, flag and ISP.

Changed

  • CDN / edge servers now serve streaming only: the control panel is available on the master server, so a node's public IP no longer exposes the admin interface.
  • A brand-new server can be added and installed straight from the panel — Install / Sync now sets up a fresh machine on its own, with no manual preparation.
  • The IP Database status and "Update now" button now sit directly under the IP Database Auto-Update settings.

Fixed

  • The Capacity & Reliability Assessment page no longer fails to open.
v1.1.7

Added

  • IP geolocation: the Server list, the overview, the CDN status page and the Connections list now show the country flag and the ISP / hosting company for each server and viewer.
  • IP databases from the panel: download and keep the geolocation databases up to date under Access & Security — IP2Location (with your download token) or GeoIP2 (from a public mirror), with an optional automatic update every few days.

Changed

  • The Install / Sync status toast now opens a details popup (progress and live log) and can be minimized or closed.
v1.1.6

Added

  • Software updates from the panel: the update notice opens a Software Update page that checks for a new release, downloads it and installs it, with an automatic rollback if the new version does not start.
  • The Server list and the overview now show each server's IP address and installed engine version.

Changed

  • The "update available" indicator in the header is now a clearly labelled badge.
  • Cluster updates are more robust: a node that does not come back online after an update is automatically rolled back to its previous version.
  • Install / Sync progress now appears as a live status toast on every page, with a details popup — no need to stay on the Manage Servers dialog to follow it.
v1.1.3

Fixed

  • Cluster license status: the Server list and each server's License page now show that server's own license, queried per server, instead of repeating the master's license on every row — a CDN/slave node no longer appears licensed just because the master is, and its key is applied on that server.
  • License messages: the license status is shown as a clear sentence (for example, a license bound to different hardware, or an expired, suspended, or not-yet-activated license) instead of an internal status code.
v1.1.2

Added

  • cvdelogo: automatic logo removal that locates the logo by computer vision and drives the standard delogo filter, enabled and disabled live while the stream runs, with the detection fields exposed in the stream form.

Changed

  • License page: shows the license holder (account name and e-mail), tier badges, and a clearer, status-matched key state.

Fixed

  • Clear Key (CENC) decryption across a live key rotation: segments that still reference the previous key keep decrypting during the switchover, and a key ID that matches neither the current nor the previous key is logged once and skipped instead of aborting the stream.
v1.1.1

Added

  • Mosaic channels: compose several inputs into one output (mosaic modes cover/contain/stretch) with a multi-input filtergraph, plus stream:// (restream an existing stream) and v4l2:// (capture device) input sources.
  • HTTPS for the panel and media: custom certificates, Let's Encrypt HTTP-01 autocert, and manual DNS-01.
  • Software updates: the engine checks a signed release feed, shows an update notice, and can download, verify and install a new build with automatic rollback.
  • HLS server-side ad insertion (SSAI) wired through the input URL.
  • Encoder preset validation with the same-encoder-family rule (incl. QSV presets).
  • CLI: --version, --reset-admin-password, --backup.
  • API: system/logs and per-server install/logs endpoints.
  • access_mode = all for current and future resources.
  • Logo removal via the standard delogo filter (x/y/w/h).

Changed

  • Installer: a failed upgrade now rolls back automatically (the previous program tree is kept until the new one passes a health check), a full program snapshot is taken before each install, and --restore brings an earlier version back. SELinux-enforcing hosts are handled and missing packages are installed (apt/dnf/yum). New flags --skip-database-backup and --backup-mysql-data.
  • Service hardening parity: TasksMax=infinity, explicit root user/group, and graphical.target in the systemd unit.

Fixed

  • Database: a unique index on stream_output(protocol, filename, stream_id) prevents duplicate outputs.
v1.1.0

Added

  • Audio: a single audio encoder now covers all mapped audio tracks, so audio_map a? with one encoder keeps every language as a separate, selectable AAC track.
  • Server monitor: the detailed live server monitor (CPU, memory, disk, network, GPU) on the overview and the /server/:id/usage view.
  • yt-dlp input: restream yt-dlp sources, including separate video+audio (DASH) and concat playlists.
  • Changelog and Terms of Service pages.

Fixed

  • Cluster: a CDN/slave node can now read the master's server monitor (was rejected with "rpc method is not permitted for this source").
  • DVB: scrambled services decrypt again — DVBlast now forwards the ECM/EMM PIDs to the SoftCAM.
  • UI: the profile Streams multi-select no longer overlaps the Server field and uses the correct font size.

Changed

  • The footer version is taken from the engine version.

Running an older build? Update from the panel under System › Software Update, or see the documentation.