Add Adapters Print

  • dvb, adapter
  • 0

Medusa Panel › DVB › Add Adapters

An adapter turns a satellite, terrestrial or cable signal into channels the engine can ingest — from a local tuner card or a SAT>IP network tuner. This page is the field reference; the tuning parameters in depth are in DVB tuners.

Choose the hardware

  • Server and Device — the server the card is in and the card itself (cards are discovered per server).
  • For a network tuner choose the SAT>IP type and enter the SAT>IP server — see SAT>IP.

Tune it

Pick a Delivery System (DVB-S/S2, DVB-T/T2, DVB-C, ATSC, ISDB-T) and the tuning fields appear — frequency, symbol rate, polarisation, modulation, FEC, DiSEqC, Unicable, multistream and more. All values and a worked Astra example are in DVB tuners.

Descrambling and services

For a scrambled mux, assign a SoftCAM — see ClearKey and SoftCAM. Once the card locks, its service table lists the TV and radio services; select them and use Create Streams to turn each into a stream.

Only descramble content you are licensed to carry.

Related


Was this answer helpful?

« Back